Measure
Your Floor
Measure
Your Floor In Just Two Easy
Steps!
 1.
Using the printer-friendly
grid page, make a simple
sketch of your room. Be sure
to show any alcoves, fireplaces,
doorways, stairs, etc.
2. Then, use the square
foot calculator to calculate
the amount of flooring you
need.
Measuring Tips From The
Pros
- Measure the width and length
of the room in at least two places,
just in case the room is not
square. Use the largest of the
two measurements.
- Allow an extra 2 inches or
5 cm on all sides for rough cut
edges, etc.
- Because carpet has a pile
direction much like the grain
of wood, the pile must lay in
the same direction. Don't forget
to take into consideration when
you need two or more pieces of
carpet.
- If
you have patterned carpet or
vinyl, you will need extra
material to enable you to get
a good match in the pattern.
Ask your salesperson about "pattern
repeat".
- Now that you know how much
flooring you need, just take
your diagram to your nearest
End Of The Roll store and our
salespeople will be happy to
help you choose your new flooring.
NOTE:
This is a guideline only. Final pricing and selection of
an installation mechanic are
the sole discretion of the purchaser.
End Of The Roll accepts no responsibiity
for any errors or ommissions
on this page, actions or workmanship
of any mechanics.
|
